Clear Hardware - Dell C9000 Series Reference Manual

clear hardware

Clear statistics from a specified hardware component.
C9000 Series
Syntax
clear hardware {cp {cpu {data-plane | i2c statistics | sata-
interface}} | cp-switch {counters} | linecard slot-id {counters |
cpu {data-plane | i2c | sata-interface} statistics} | hg-stats|
unit unit-num {counters} | party-bus {counters} | pe pe-id stack-
unit unit-number {counters | cpu | stack—port | unit} | rp {cpu
{data-plane | i2c | sata-interface} statistics} | sfm sfm-unit-num
{counters}}
Parameters
cp
cp-switch
linecard slot-id
Enter the keywords cp with a command option to clear the
hardware statistics for the Control Processor. The command
options are:
• cpu data-plane statistics: Clears data-plane
statistics, including the high-Gigabit Ethernet (HiGig) port
statistics with input/output counters to which the stacking
module is connected.
• cpu i2c statistics: Clears active i2c-address
statistics.
• cpu sata-interface statistics: Clears sata-
interface error counter statistics.
Enter the keyword cp-switch with a command option to clear
the hardware statistics for control-plane and protocol control
traffic. The command options are:
• counters: Clears the counters for control-plane and
protocol control packets to troubleshoot an error
condition.
Enter the linecard slot-id parameters with a command
option to clear the hardware statistics for a specified switch line
card. The range of slot IDs is from 0 to 11. The command
options are:
• counters: Clears traffic counters on line-card ports.
• cpu data-plane statistics: Clears data-plane
statistics, including the HiGig port statistics with input/
output counters to which the stacking module is
connected.
• cpu i2c statistics : Clears active i2c-address
statistics.
Debugging and Diagnostics 765