Show Mac Learning-Limit - Dell Z9500 Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

show mac-address-table

show mac learning-limit

Display MAC address learning limits set for various interfaces.

show mac learning-limit [violate-action] [detail] [interface

violate-action

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

— displays the current MAC address configuration.

(OPTIONAL) Enter the keywords violate-action to

display the MAC learning limit violation status.

(OPTIONAL) Enter the keyword detail to display the MAC

learning limit in detail.

(OPTIONAL) Enter the keyword interface with the

following keywords and slot/port or number information:

For a port channel interface, enter the keywords port-

channel then a number. The range is from 1 to 512.

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

EXEC Privilege

Introduced on the S6000-ON.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Added support for 4-port 40G line cards on ExaScale.

Introduced on the S4810.

Added the vlan option on the E-Series.

Introduced on the C-Series.