Advertisement
Example
The following example copies a system image named file1 from the TFTP server with an IP address
of 172.16.101.101 to non active image file.
console# copy tftp://172.16.101.101/file1 image
Accessing file 'file1' on 172.16.101.101...
Loading file1 from 172.16.101.101:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!! [OK]
Copy took 0:01:11 [hh:mm:ss]
boot system
The boot system Privileged EXEC mode command specifies the system image that the Ethernet
Switch Module loads at startup.
Syntax
boot system {image-1 | image-2}
•
image-1 — Specifies image 1 as the system startup image.
•
image-2 — Specifies image 2 as the system startup image.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
•
Use the show bootvar command to find out which image is the active image.
Examples
The following example loads system image 1 for the next Ethernet Switch Module startup.
console# boot system image-1
Configuration and Image Files
93
Advertisement
