Show Ip Bgp Extcommunity-List - Dell S4810 Reference Manual

show ip bgp extcommunity-list

View information on all routes with Extended Community attributes.
S4810
Syntax
show ip bgp [vrf vrf-name] [ipv4 unicast] extcommunity-list
[list name]
Parameters
vrf vrf-name
ipv4 unicast
list name
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Usage
To view the total number of COMMUNITY attributes found, use the show ip bgp
Information
summary command. The text line above the route table states the number of
COMMUNITY attributes found.
The show ip bgp community command without any parameters lists BGP
routes with at least one BGP community attribute and the output is the same as for
the show ip bgp command output.
460
(OPTIONAL) Enter the keywords vrf and then the name of
the VRF to view information on all routes with extended
community attributes corresponding to that VRF.
(OPTIONAL) Enter the keywords ipv4 unicast to view
information only related to ipv4 unicast routes.
Enter the extended community list name you wish to view.
The range is 140 characters.
EXEC
EXEC Privilege
Added support for VRF.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Border Gateway Protocol