Bgp Bestpath As-Path Multipath-Relax; Bgp Bestpath Med Confed - Dell S4810 Reference Manual

bgp bestpath as-path multipath-relax

Include prefixes received from different AS paths during multipath calculation.
S4810 S6000
Syntax
bgp bestpath as-path multipath-relax
To return to the default BGP routing process, use the no bgp bestpath as-
path multipath-relax command.
Defaults Disabled
Command ROUTER BGP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.4
Version 8.3.7.0
Usage The bestpath router bgp configuration mode command changes the
Information default bestpath selection algorithm. The multipath-relax option allows load-
sharing across providers with different (but equal-length) autonomous system
paths. Without this option, ECMP expects the AS paths to be identical for load-
sharing.

bgp bestpath med confed

Enable MULTI_EXIT_DISC (MED) attribute comparison on paths learned from BGP confederations.
S4810
Syntax
bgp bestpath med confed
To disable MED comparison on BGP confederation paths, enter the no bgp
bestpath med confed command.
Defaults Disabled
Command ROUTER BGP
Modes
384
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Border Gateway Protocol