Set Community - Dell S4810 Reference Manual

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage
The community list used in the set comm-list delete command must be
Information
configured so that each filter contains only one community. For example, the filter
deny 100:12 is acceptable, but the filter deny 120:13 140:33 results in an
error.
If the set comm-list delete command and the set community command
are configured in the same route map sequence, the deletion command (set
comm-list delete) is processed before the insertion command (set
community).
Related
match community
Commands

set community

set community
Allows you to assign a BGP COMMUNITY attribute.
S4810
Syntax
set community {community-number | local-as | no-advertise | no-
export | none} [additive]
To delete a BGP COMMUNITY attribute assignment, use the no set community
{community-number | local-as | no-advertise | no-export | none}
command.
Access Control Lists (ACL)
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Increased the name string to accept up to 140 characters.
Prior to 7.8.1.0, names are up to 16 characters long.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— redistributes routes that match the COMMUNITY attribute.
— specifies a COMMUNITY attribute.
285