[2]
[1]
F-7-11
7.6.4 Manual Pickup Roller
7.6.4.1 Removing the Manual Pickup Roller
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
1) Detach the front cover and front-left cover.
2) Remove the screw [1], and then detach the roller cover [2].
F-7-12
3) While holding the manual separation pad [1], release the right hook [2]
and then slide the right bearing [3].
4) Remove the manual pickup roller [4].
[4]
[1]
F-7-13
7.6.5 Manual Feed Tray paper sensor
7.6.5.1 Removing the Manual Tray Sensor
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
1) Detach the left cover and rear-left cover.
2) Remove the relay PCB, registration clutch, and pickup drive unit.
3) Disconnect the connector [1], release the claw, and then remove the
manual tray sensor [2].
[3]
0013-1224
[2]
[1]
[3]
[2]
0013-1233
[1]
F-7-14
7.6.6 Manual Feed Pickup Solenoid
7.6.6.1 Removing the Manual Pickup Solenoid
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
1) Detach the left cover and rear-left cover.
2) Disconnect the connector [1], remove the screw [2], and then remove the
manual tray pickup solenoid [3].
[1]
F-7-15
7.6.7 Manual Separation Pad
7.6.7.1 Removing the Manual Separation Pad
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
1) Remove the manual pickup roller.
2) While holding the manual separation pad [1], release the claw [3] and slide
the left bearing [4] with attention paid to the sensor flag [2].
[4]
[2]
F-7-16
3) With the flathead screwdriver inserted as shown below, remove the
manual pickup pad [1].
Chapter 7
[2]
0013-1232
[3]
[2]
0013-1234
[3]
[1]
7-7