Removing The Main Thermistor - Canon ImageRunner 600 Service Manual

5) Remove the two screws [10], and detach
the thermal switch [11].
4.

Removing the Main Thermistor

1) Remove the fixing assembly from the
copier.
2) Detach the fixing cleaning belt, and re-
move the oil pan.
3) Remove the fixing harness cover.
4) Disconnect the connector [1] of the ther-
mistor; then, remove the screw [2], and
detach the thermistor assembly [3] by
shifting it to the rear.
Caution:
When shifting the thermistor assembly
to the rear, take care not to damage the
fixing roller.
COPYRIGHT © 1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 8 FIXING SYSTEM
[10]
[11]
Figure 8-C508
[3]
[1]
Figure 8-C509
[10]
[2]
8-35