SROS Command Line Interface Reference Guide
fair-queue <threshold>
Use the fair-queue command to enable weighted fair queuing (WFQ) on an interface. Use the no form of
this command to disable WFQ and enable FIFO queueing for an interface. WFQ is enabled by default for
WAN interfaces.
Syntax Description
<threshold>
Default Values
By default, fair-queue is enabled with a threshold of 64 packets.
Usage Examples
The following example enables WFQ on the interface with a threshold set at 100 packets:
ProCurve(config)#interface ppp 1
ProCurve(config-ppp 1)#fair-queue 100
5991-2114
Optional. Specifies the maximum number of packets that can be present
in each conversation sub-queue. Packets received for a conversation after this
limit is reached are discarded. Range: 16 to 512 packets.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
PPP Interface Configuration Command Set
1094