Normal - Keysight x-series User Reference Manual

Preset
Min
Max
Initial S/W Revision

Normal

Selects the normal measurement view.
Key Path
Example
Initial S/W Revision
Meas Results
Selects the Meas Result view.
Key Path
Example
Initial S/W Revision
Disturbance Indicator Line
When on, a vertical white line will indicate the location of a disturbance on graph that corresponds to the
selected disturbance in the disturbance list.
Key Path
Remote Command
Example
Dependencies
Preset
State Saved
Initial S/W Revision
EMI Receiver Mode Reference
100 (Set by Restore Misc Defaults)
0
100
Prior to A.02.00
View/ Display
DISP:DAN:VIEW NORM
A.14.00
View/ Display
DISP:DAN:VIEW MRES
A.14.00
View/ Display
:DISPlay:DANalyzer:VIEW:DISTurbance:ILINe ON|OFF|1|0
:DISPlay:DANalyzer:VIEW:DISTurbance:ILINe?
:DISP:DAN:VIEW:DIST:ILIN 1
:DISP:DAN:VIEW:DIST:ILIN?
The Disturbance Indicator Line will only be shown when the measurement is not running.
ON
Saved in instrument state
A.14.00
12 Disturbance Analyzer Measurement
View/Display
1137