Peak Search; Figure 2-13 Peak Search Menu Page; Table 2-5 Peak Search Menu Description - Keysight U8903B User Manual

2 Operation and Features

Peak Search

The Peak Search menu page allows you to define a specific threshold to determine which
signals can be considered peaks, excluding the unwanted signals from the search. A peak
can only qualify as a peak if there is a rising slope before the point and falling slope after
the point. A minimum can only qualify as a minimum if there is a falling slope before the
point and rising slope after the point.
The Peak Search menu page is only available in the graph analysis mode.
NOTE
Figure 2-13
Table 2-5 Peak Search menu description
Menu Description
Press the Max Peak softkey to search and move the active marker to the highest peak which is higher than the peak
Max Peak
threshold value. If the active maker is off, the marker will be turned on before performing the maximum peak operation.
Press the Next Peak softkey to search and move the active marker to the next peak which is higher than the peak threshold
Next Peak
value. If the active maker is off, the marker will be turned on before performing the next peak operation.
Press the Prev Peak softkey to search and move the active marker to the previous peak which is higher than the peak
Prev Peak
threshold value. If the active maker is off, the marker will be turned on before performing the previous peak operation.
Press the Next Min softkey to search and move the active marker to the previous peak which is lower than the minimum
Next Min
threshold value. If the active maker is off, the marker will be turned on before performing the next minimum operation.
Press the Prev Min softkey to search and move the active marker to the next peak which is lower than the minimum
Prev Min
threshold value. If the active maker is off, the marker will be turned on before performing the previous minimum operation.
Threshold Press the Threshold softkey to configure the peak search setting. Refer to "Threshold" on page
68
Peak Search menu page
69 for more information.
Keysight U8903B User's Guide