Earth cable installation at Motherboard for front USB flex cable
routing
Instructions
Earth cable- N1912-61018
Screw- 0515-1940
Washer- 3050-2633
Step 1:
Install the Earth Cable at location shown.
Sequence:
1) Earth Cable N1912-61018
2) Flat Washer 3050-2633
3) Screw 0515-1940
Tighten two screws using bit T8 torque driver with 5lbf-in.
Step 2:
Lift up the Earth Cable as shown.
Keysight N1913B/N1914B EPM Series Power Meters Service Guide
Visual
Repair Guide
6
119