Step 6: Import And Play Back Kml Files Into 3Rd Party Software (Example: Google Earth With Animation Tool) - Keysight FieldFox B Series User Manual

Over–the–Air Measurements (OTA) – LTE FDD Option 370, LTE TDD Option 371, 5G TF
Option 377, 5G NR / 5G NR EVM Conducted Option 378
How to Set Up Over–the–Air (OTA) Mode Settings
Procedure:
1. Press When done press Stop. Immediately stops recording and a "Save
Record-Play files are saved to:
2. In the "Save the log file" window that opens, optionally change the name
3. 'To begin recording: Press
4. When done press Stop. The file is automatically saved to the defined
Learn more about file settings, refer to
5. Press
Learn more, refer to
page
Step 6: Import and Play back KML Files into 3rd Party Software
(Example: Google Earth with Animation Tool)
Features
Use the Playback Slider to replay measurement results. See also Google Maps
and or Google Earth's help.
— Open the FieldFox *.KML file in Google Earth. Time Slider appears in upper
— Manual Mode – Move the time slider cursor to see color-coded icons
— Loop mode has a Fast-Slow Replay Option.
392
the Log File" menu opens to rename and save your data log file.
If File Folder is set to Default then Record-Play files are
—
save-recalled to:
"[CurrentDevice]\RecordPlayback\[Current
mode]\"
If File Folders are set to System, then Record-Play files are
—
save-recalled to:
"CurrentDevice\<UserSelectedFolder>\
of the default file displayed, else press Done.
Saves the file and exits the current softkey menu.
Device Type and File Type.
Else, edit the file name and folder path, under
Folder where the file results will be stored.
Back
Chapter 16
497.
left of the map.
pop-up according to the timestamp.
Record
Record Save/Recall
Chapter 32, "File Management."
Mapping and "Setting up Data Logging" on
Keysight N9938-90006 User's Guide
> File