About Over-The-Air (Ota) Measurements; Lte Fdd And Lte Tdd Features (Option 370 And Option 371); Lte Fdd And Lte Tdd Have The Following Features - Keysight A Series User Manual

Hide thumbs Also See for A Series:

Table of Contents

Over–the–Air Measurements (OTA) – LTE FDD Option 370, LTE TDD Option 371, 5GTF

Option 377 (CPU2 Only)

About Over–the–Air (OTA) Measurements

OTA mode supports these standards:

— 5GTF measurements

Some measurement parameters are auto-coupled and are not user-settable.

IMPORTANT! LTE FDD, LTE TDD, and 5GTF only demodulate PSS and SSS

signals using the FieldFox's 10 MHz demodulation path. User data

channels are not demodulated.

IMPORTANT! LTE FDD and LTE TDD generally have similar cell features, but

the Band and Channel choices are different for the Channel Table settings.

Cell Scan Results:

— Center frequency

— Physical Cell Information (PCI) – (Cell ID) – (C/S/G)

— RSRP (Reference Signal Received Power) (dBm)

— RSRQ (Reference Signal Received Quality) (dB)

— RSSI (Reference Signal Strength Indicator) (dBm)

— PSS (Primary Synchronization Signal) (dBm)

— SSS (Secondary Synchronization Signal) (dBm)

— SINR (Signal to Interference & Noise Ratio) (dB)

— Frequency error (Hz)

Data Formats:

User can set up and display 1, 2, 3 or 4 simultaneous measurements of key

performance indicators (KPI's) for any component carrier (CC0 through CC4),

up to 5 carriers, in any combination of the following:

— Table – Cell scan numeric results (for up to 6 cell sites (CCs) including

Physical Channel Information (PCI) – (Cell ID), RSRP, RSRQ, RSSI, PSS,

SSS, SINR, Freq Err.

Keysight N9927-90020 User's Guide

Show Quick Links

Table of Contents

Troubleshooting