Configuration: Distance Between Controller And Calpod Is More Than 2 Meters; Configuration: Using A 1 X 12 Calpod Cable Fan-Out Splitter For More Than Four Calpods - Keysight CalPod 855 A Series Service Manual

Reference Information
Advanced Multiport CalPod Configurations
Configuration: Distance Between Controller and CalPod is More Than 2
Meters
When the distance between the 85523B CalPod Controller and the CalPod unit is
more than two meters, an 85554A extension cable for CalPod drive cables is
required. This extension cable is 10 meters in length. The 12-pin male connector
joins with the 85523B CalPod controller, and the 12-pin female connector joins
with the 12-pin connector on the 85552/53A CalPod drive cable (2 meter length).
The 9-pin male connector of the 85552/53A CalPod drive cable joins with the
CalPod.
Configuration: Using a 1 x 12 CalPod Cable Fan-Out Splitter for More
Than Four CalPods
As shown in the following graphic, a Keysight 85556A 20 GHz and 40 GHz CalPod
1x12 fan-out splitter can be used to connect four or more 855xxA/B Series
CalPods to an 85523B CalPod Controller.
2-8 85563-90005 Operation & Service Guide