Figure 2-43 Trig In And Trig Out Connection Diagram Between Power Meter And Power Source - Keysight N1911A User Manual

Procedures
1 Connect sensor to a power source.
2 Connect power meter TRIG OUT to power source TRIG IN using a BNC cable.
TRIG
Figure 2-43
3 Press
Keysight N1911A/1912A User's Guide
The same connection is applied for power source TRIG OUT to power meter
TRIG IN. See Figure
TRIG
OUT
IN
Power source
TRIG IN and TRIG OUT connection diagram between power
meter and power source.
. The Channel Setup screen displays as below.
2-43.
(optional connection)
Power sensor
General Power Meter Functions
TRIG
IN
Power meter
2
TRIG
OUT
105