Browse Pim Neighbor Table; Ospf Monitoring; Browse Ospf Lsdb Table - D-Link xStack DGS-3600 User Manual

Browse PIM Neighbor Table

Multicast routers use
Multicast (PIM) determine which other multicast
routers should receive multicast packets. The PIM
Neighbor Address Table contains information
regarding each of a router's PIM neighbors. This
screen may be found in the Monitoring folder under
the heading PIM Monitor. To search this table,
enter either an Interface Name or Neighbor
Address into the respective field and click the Find
button. PIM neighbors of that entry will appear in
the PIM Neighbor Table below.

OSPF Monitoring

This section offers windows regarding OSPF (Open Shortest Path First) information on the Switch, including the OSPF LSDB
Table, OSPF Neighbor Table and the OSPF Virtual Neighbor Table. To view these tables, open the Monitoring folder and
click OSPF Monitoring.

Browse OSPF LSDB Table

This table, located in the Monitoring folder, can be found in the OSPF Monitor folder, by clicking on the Browse OSPF LSDB
Table link. The OSPF Link-State Database Table displays the current link-state database in use by the OSPF routing protocol
on a per-OSPF area basis.
The user may search for a specific entry by entering the following information into the fields at the top of the screen:
To browse the OSPF LSDB Table, you first must select which browse method you want to use in the Search Type field. The
choices are All, Area ID, Advertise Router ID, LSDB, Area ID & Advertise Router ID, Area ID & LSDB, and Advertise Router ID
& LSDB.
If Area ID is selected as the browse method, users must enter the IP address in the Area ID field, and then click Find.
If Adv. Router ID is selected, users must enter the IP address in the Adv. Router ID field, and then click Find.
If LSDB is selected, users must select the type of link state (RTRLink, NETLink, Summary, ASSummary, ASExtLink and
NSSA_EXT) in the LSDB Type field, and then click Find.
The following fields are displayed in the OSPF LSDB Table:
Parameter
Area ID
Adv. Router ID
LSDB Type
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Protocol Independent
Figure 12- 41. Browse OSPF LSDB Table
Description
Allows the entry of an OSPF Area ID. This Area ID will then be used to search the table, and
display an entry − if there is one.
Displays the Advertising Router's ID.
Displays which one of eight types of link advertisements by which the current link was
discovered by the Switch: All, Router link (RTRLink), Network link (NETLink), Summary link
(Summary), Autonomous System link (ASSummary), Autonomous System external link
(ASExternal), and NSSA_EXT (Not So Stubby Area external)
Figure 12- 40. PIM Neighbor Table
270