Pim Monitoring; Pim Neighbor Address Table - D-Link xStack DES-6500 User Manual

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual

PIM Monitoring

Multicast routers use Protocol Independent Multicast (PIM) to determine which other multicast routers should receive
multicast packets. To find out more information concerning PIM and its configuration on the Switch, see the IP Multicast
Routing Protocol chapter of Section 6, Configuration.

PIM Neighbor Address Table

The PIM Neighbor Address Table contains information regarding each of a router's PIM neighbors. This screen may be
found in the Monitoring folder under the heading PIM Monitor. To search this table, enter either an Interface Name or
Neighbor Address into the respective field and click the Find button. PIM neighbors of that entry will appear in the PIM
Neighbor Table below.
Figure 9- 3 . PIM Neighbor Table 6
260