DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
show authen parameter
Purpose
Used to display the authentication parameters currently configured on the Switch.
Syntax
show authen parameter
Description
This command will display the authentication parameters currently configured on the Switch,
including the response timeout and user authentication attempts.
This command will display the following fields:
Response timeout – The configured time allotted for the Switch to wait for a response of
authentication from the user attempting to log in from the command line interface or telnet
interface.
User attempts: The maximum number of attempts the user may try to become authenticated
by the Switch, before being locked out.
Parameters
None.
385