Show Lldp - D-Link xStack DGS-3620 Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28PC:admin#config lldp tx_delay 8
Command: config lldp tx_delay 8
Success.
DGS-3620-28PC:admin#
To change the re-initialization delay interval to five seconds:
DGS-3620-28PC:admin#config lldp reinit_delay 5
Command: config lldp reinit_delay 5
Success.
DGS-3620-28PC:admin#
59-4

show lldp

Description
This command is used to display LLDP.
Format
show lldp
Parameters
None.
Restrictions
None.
Example
To display LLDP:
DGS-3620-28PC:admin#show lldp
Command: show lldp
LLDP System Information
Chassis ID Subtype
Chassis ID
System Name
System Description
System Capabilities
LLDP Configurations
LLDP Status
LLDP Forward Status
Message TX Interval
: MAC Address
: 00-11-22-33-44-55
:
: Gigabit Ethernet Switch
: Repeater, Bridge
: Disabled
: Disabled
: 30
716