Bgp Community List Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in BGP AS Path Access List Settings are described below:
Parameter
List Name
Mode
Regular Expression
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

BGP Community List Settings

This window is used to view and configure the BGP feature's community list settings. The community
attribute is used for implementing policy routing. It is an optional, transitive attribute and facilitates transfer
of local policies through different autonomous systems. A community attribute is represented by a 32 bits
integer. If no community value is associated with a path, by default, the Internet community is associated
with the path.
A community list can contain multiple rule entries, either as a deny entry or a permit entry. Use the
window to define a community list rule entry.
A community list can be either a standard community list or an expanded community list. The rule entry
defined in a standard community list contains a string formed by a number of communities, separated by
space. The rule entry defined in an expanded community list contains a regular expression.
To view the following window, click L3 Features > BGP > BGP Community List Settings, as shown
below:
Figure 6-158 BGP AS Path Access List Settings Window
Description
Enter the access list's name here that will be used in the AS path
configuration. This name can be up to 16 characters long.
Select the mode here. Options to choose from are Permit, Deny, and
None.
After selecting the Permit or Deny options, enter the regular
expression for the matching pattern here.
286