Delete Snmp Community; Delete Snmp All_Community; Show Snmp Community - D-Link DGS-1210/ME Series Reference Manual

delete snmp community

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the SNMP community string 'dlink':
DGS-1210-28MP/ME:5# delete snmp community dlink
Command: delete snmp community dlink
Success.
DGS-1210-28MP/ME:5#

delete snmp all_community

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete all SNMP community strings:
DGS-1210-28MP/ME:5# delete snmp all_community
Command: delete snmp all_community
Success.
DGS-1210-28MP/ME:5#

show snmp community

Purpose
Syntax
Description
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
To remove a specific SNMP community string from the Switch.
delete snmp community <community_string 32>
The delete snmp community command removes a previously
defined SNMP community string from the Switch.
<community_string 32> − A string of up to 32 alphanumeric
characters that is used to identify members of an SNMP community
to delete. This string is used like a password to give remote SNMP
managers access to MIB objects in the Switch's SNMP agent.
Only administrator, operate or power user-level users can issue this
command.
To remove all SNMP community string from the Switch.
delete snmp all_community
The delete snmp all_community command removes all previously
defined SNMP community string from the Switch.
None.
Only administrator, operate or power user-level users can issue this
command.
To display SNMP community strings configured on the Switch.
show snmp community {<community_string 32>}
The show snmp community command displays SNMP community
93