Delete Snmp Community; Show Snmp Community - D-Link DGS-1100-06/ME Cli Reference Manual

Restrictions
Example usage:
To create the SNMP community string 'dlink:'
DGS-1100-06/ME:5#create snmp community dlinkgroup dlink
Command: create snmp community dlinkgroup dlink
Success.
DGS-1100-06/ME:5#

delete snmp community

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the SNMP community string 'dlink':
DGS-1100-06/ME:5#delete snmp community dlink
Command: delete snmp community dlink
Success!
DGS-1100-06/ME:5#

show snmp community

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently entered SNMP community strings:
DGS-1100-06/ME:5#show snmp community
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
manager is allowed to access on the Switch.
Only administrator or operate-level users can issue this command.
To remove a specific SNMP community string from the Switch.
delete snmp community <community_string 32>
The delete snmp community command removes a previously
defined SNMP community string from the Switch.
<community_string 32> − A string of up to 32 alphanumeric
characters that is used to identify members of an SNMP community
to delete. This string is used like a password to give remote SNMP
managers access to MIB objects in the Switch's SNMP agent.
Only administrator or operate-level users can issue this command.
To display SNMP community strings configured on the Switch.
show snmp community {<community_string 32>}
The show snmp community command displays SNMP community
strings that are configured on the Switch.
<community_string 32> − A string of up to 20 alphanumeric
characters that is used to identify members of an SNMP community.
This string is used like a password to give remote SNMP managers
access to MIB objects in the Switch's SNMP agent.
None.
46