Show Trunk Group; Fax/Modem Configuration Commands; Configure Dial-Peer Voice Voip Fax Protocol - Avaya 2330 Reference Manual

SIP Media Gateway commands
Table 389: Variable definitions
<trunk-group-name>
[no]
Example
AG/configure/voice-port (7/2/1)# trunk-group north5

show trunk group

Use this command to display the configured trunk groups. This command displays the various
trunk groups configured on the system and corresponding voice ports.
Syntax
show trunk group <trunk-group-name>
Table 390: Variable definitions
<trunk-group-name>
Example
AG# show trunk group

Fax/Modem configuration commands

configure dial-peer voice voip fax protocol

Use this command to specify the fax protocol to be used for a specific VoIP dial peer.
356 Command Line Reference
Variable
Variable
Comments? infodev@avaya.com
Value
Specifies the name of the trunk group to
which the port is assigned. Maximum length
of the trunk group name is 16 alphanumeric
characters.
Removes the port from the specified trunk
group.
Value
Displays information about the specific trunk
group
August 2013