Combination Limitations; Slot Allocation - Avaya G450 Quick Start For Hardware Installation

Install media modules

Combination limitations

The following limitations apply to combining media modules in the Branch Gateway:
• Three MM340/MM342 WAN modules
• Up to seven MM721 modules
• The MM760 is not supported

Slot allocation

The Branch Gateway chassis has eight media module slots, marked V1, V2, V3, V4, V5, V6,
V7, and V8 (see
Allocate a slot for the media module. Make sure your slot allocations allow a permissible slot
for every media module.
Figure 2: The G450 Branch Gateway front panel ports and slots
Table 1: Figure notes:
1. System LEDs
2. USB ports
3. Console port
4. Services port
5. Compact flash slot
6. ETR (Emergency Transfer Relay)
port
7. CCA (Contact Closure) port
8. ETH WAN ports
9. ETH LAN ports
10. RST button
28 Quick Start for Hardware Installation: Avaya G450 Branch Gateway
the figure Each media module is restricted to certain slots.
1. ASB button
2. V1 — slot for standard media module or
S8300 Server
3. V2 — slot for standard media module
4. V3 — slot for standard media module
5. V4 — slot for standard media module
6. V5 — slot for standard media module
7. V6 — slot for standard media module
8. V7 — slot for standard media module
9. V8 — slot for standard media module
February 2011