Show Lldp Statistics - Dell S6000 Reference Manual

Usage Omitting the keyword detail displays only the remote chassis ID, Port ID, and
Information
Dead Interval.
Example
R1(conf-if-gi-1/31)#do show lldp neighbors
Loc PortID Rem
--------------------------------------------------------------
Gi 1/21
Gi 1/31

show lldp statistics

Display the LLDP statistical information.
S6000
Syntax
show lldp statistics
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.7.1.0
Version 7.6.1.0
Version 7.4.1.0
Example
Dell#show lldp statistics
Total number of neighbors: 300
Last table change time
Number of Table Inserts
Number of Table Deletes
Number of Table Drops
Number of Table Age Outs :
Dell#
LLDP-MED Commands
The following are the LLDP-MED (Media Endpoint Discovery) commands.
Dell Networking OS LLDP-MED commands are an extension of the set of LLDP TLV advertisement
commands. The C-Series and S-Series support all commands.
908
Host Name
R2 GigabitEthernet
R3 GigabitEthernet
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
:
:
:
:
Rem Port Id Rem Chassis Id
2/11 00:01:e8:06:95:3e
3/11 00:01:e8:09:c2:4a
Mon Oct 02 16:00:52 2006
1621
200
0
400
Link Layer Discovery Protocol (LLDP)