Show Power - Extreme Networks ExtremeWare XOS Command Reference Manual

show power

show power {<ps_num>} {detail}
Description
Displays the current status of the installed power supplies.
Command Syntax
ps_num
detail
Default
N/A.
Usage Guidelines
Use this command to view detailed information about the health of the power supplies.
This status information may be useful for your technical support representative if you have a network
problem.
The switch collects the following power supply information:
• State—Indicates the current state of the power supply. Options are:
— Empty: There is no power supply installed.
— Power Failed: The power supply has failed.
— Power Off: The power supply is off.
— Power On: The power supply is on and working normally.
• PartInfo—Provides information about the power supply including the:
— Serial number, a collection of numbers and letters, that make up the serial number of the power
supply.
— Part number, a collection of numbers and letters that make up the part number of the power
supply.
• Revision—Displays the revision number of the power supply.
• FailureCode—Specifies the failure code of the power supply.
• Odometer—Specifies the date and how long the power supply has been operating.
• Temperature—Specifies, in celsius, the current temperature of the power supply.
• Input—Specifies the input of the power supply.
• Output 1 and Output 2—Specifies the output of the power supply.
In ExtremeWare XOS 10.1 and earlier, use the
detailed health information about the power supplies.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies the slot number of the installed power supply.
The detail option is reserved for future use.
show powersupplies {detail}
show power
command to view
141