Show Inline-Power Info Show Inline-Power Info Port - Extreme Networks ExtremeWare Command Reference Manual

Power Over Ethernet Commands—Summit 300 and 400-24p Switches and Alpine PoE Module
show inline-power info
show inline-power info port
For the Alpine series I/O modules:
show inline-power info [port <portlist | detail port <portlist]
For the Summit 300-48 switch:
show inline-power info [detail] port <portlist]
Description
Displays inline power information for the specified ports.
NOTE
This command is available only for the Alpine FM-32Pi PoE Module and the Summit 300-48 switch.
Syntax Description
detail Generates a detailed report.
portlist Specifies one or more slots and ports. On a modular switch, can be a list of slots and ports. On a
stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5, 1:*, 1:5, 1:6-1:8.
Default
N/A
Usage Guidelines
You can use this command to generate a summary report or a detailed report.
Summary output displays the following inline power information for the specified ports:
• State—Displays the port power state:
— Disabled
— Searching
— Discovered
— Delivering
— Faulted
— Disconnected
— Other
— Denied
• Class—Displays the class type:
— "-----": disabled or searching
— "class0": class 0 device
2318 ExtremeWare 7.5 Command Reference Guide