Show 802.1X - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show 802.1x

Displays information about ports configured for 802.1X.
show 802.1x [slot/port]
Syntax Definitions
slot
port
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
If you do not specify a particular slot/port, information for all 802.1X ports is displayed.
Examples
-> show 802.1x 1/13
802.1x configuration for slot 1 port 13:
direction
operational directions
port-control
quiet-period (seconds)
tx-period (seconds)
supp-timeout (seconds)
server-timeout (seconds)
max-req
re-authperiod (seconds)
reauthentication
Supplicant polling retry count = 2
output definitions
direction
operational directions
page 44-26
The slot of the port for which you want to display information.
The port for which you want to display 802.1X information.
= both,
= both,
= auto,
= 60,
= 30,
= 30,
= 30,
= 2,
= 3600,
= no
Whether the port is configured for control on bidirectional traffic or
incoming traffic only. May be configured through the
mand. Possible values are both or in.
The operational state of controlled direction on the port, which is set
automatically by the switch. If the value of direction is both, the value
of operational directions is both. If the value of direction is in, the
operational state is set to in on initialization and when the port's MAC
address becomes operable. If the port's MAC address becomes inopera-
ble, the operational direction is set to both.
OmniSwitch 6250 CLI Reference Guide
802.1X Commands
802.1x com-
November 2009