ABB IRB 1100 Product Manual page 71

Examples of mounting angles tilted around the X axis (Gravity Alpha)
The following illustration shows the IRB 120, but the same principle applies for all
robots.
xx2100000297
xx2100000299
Mounting angle
0° (Floor mounted)
90° (Wall)
-90° (Wall)
Limitations in working area
If mounting the robot on a wall, the working range of axis 1 is limited. These
limitations are specified in the table
Defining the system parameters in RobotWare
The value of the system parameters that define the mounting angle must be
redefined when changing the mounting angle of the robot. The parameters belong
to the type Robot, in the topic Motion.
Product manual - IRB 1100
3HAC064992-001 Revision: L
3.3.4 Setting the system parameters for an inverted or a tilted robot
0°
Note
For suspended robots (180°), it is recommended to use Gravity Beta instead of
Gravity Alpha.
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
-
xx2100000300
Gravity Alpha
0
1.570796
-1.570796
Working range on page
Continues on next page
Continued
48.
71