ABB IRB 1100 Product Manual page 324

5 Repair
5.4.2 Replacing the swing
Continued
2
Continues on next page
324
Action
Make sure that:
• The hole on the cable protection tube is
aligned with the locking screw hole on the
gearbox.
• The cable protection tube surface is com-
pletely parallel with the pulley cover at one
side and with the flange at the other side.
© Copyright 2019-2022 ABB. All rights reserved.
Note
xx1800003063
xx1800003049
xx1800003050
Product manual - IRB 1100
3HAC064992-001 Revision: L