ABB IRB 1100 Product Manual page 124

5 Repair
5.2.2 Cut the paint or surface on the robot before replacing parts
Continued
3
4
5
6
124
Action
Seal all refitted joints with sealing compound.
Use the tooling pin to even out the surface
of the sealing compound.
For robots with protection type Clean Room
Wait 10 minutes.
Use Touch up paint Clean Room/Hygienic,
white to paint any damaged surfaces.
Note
Always read the instruction in the product
data sheet in the paint repair kit for Clean
Room/Hygienic.
Note
After all repair work, wipe the robot free from particles with spirit on a lint free
cloth.
© Copyright 2019-2022 ABB. All rights reserved.
Description
xx0900000122
xx0900000125
For robots with protection type Clean
Room
Sikaflex 521FC skin dry time (10 minutes).
3HAC036639-001
Product manual - IRB 1100
3HAC064992-001 Revision: L