ABB IRB 1100 Product Manual page 393

3
4
Disconnecting the axis-6 motor connectors
1
2
Product manual - IRB 1100
3HAC064992-001 Revision: L
Action
Access the connector FB5 from the process hub
and disconnect the connector.
Disconnect the connector.
• MP5
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
CAUTION
For robots with protection type Clean Room
Always cut the paint with a knife and grind the
paint edge when disassembling parts of the robot!
See Cut the paint or surface on the robot before
replacing parts on page 123.
© Copyright 2019-2022 ABB. All rights reserved.
5 Repair
5.6.1 Replacing the housing
Continued
Note
xx1800002950
xx1800002993
Note
Continues on next page
393