ABB IRB 1100 Product Manual page 718

6 Calibration
6.3.1 Updating revolution counters on OmniCore robots
Continued
2
3
Continues on next page
718
Action
Inspect the cable harness status.
The cable harness must be in vertical state as
shown in the figure.
• If the cable harness twists towards left,
proceed to step 3.
• If the cable harness twists towards right,
proceed to step 4.
Cable harness twisting towards left
Jog the axis 4 anti-clockwise (with the operator
facing the rear) until the cable harness is in vertic-
al state.
© Copyright 2019-2022 ABB. All rights reserved.
Note
xx1800003317
0°
60°
120°
180°
300°
240°
xx1800003318
Product manual - IRB 1100
3HAC064992-001 Revision: L