ABB IRB 1100 Product Manual page 89

Connector kits (optional)
Connector kits, base
R1.C1 and R1.C2 connectors on the base are parts of the CP/CS cable and Ethernet
floor cable, respectively. For details about the robot cabling, see
and connection points on page
Connector kits, wrist
The table describes the CP/CS and Ethernet (if any) connector kits for wrist.
Position
Connector kits
Protection covers
Protection covers for water and dust proofing
Protection covers are delivered together with the robot and must be well fitted to
the connectors in any application requiring water and dust proofing.
Always remember to refit the protection covers after removing them.
xx1900000132
A
B
C
Product manual - IRB 1100
3HAC064992-001 Revision: L
84.
Description
CP/CS M12 CPCS Male straight connect-
or kits
M12 CPCS Male angled connector
kits
Ethernet M12 Ethernet Cat5e Male straight
connector kits
M12 Ethernet Cat5e Male angled
connector kits
(A)
(B)
(C)
CP/CS or Ethernet connector protection covers
SMB connector protection cover
Air hose connector protection covers
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.6.2 Customer connections
Art. no.
3HAC066098-001
3HAC066099-001
3HAC067413-001
3HAC067414-001
Continued
Robot cabling
(C)
89