ABB IRB 1100 Product Manual page 727

xx1800003514
xx1800003515
Spare parts
When calibration is not being performed, a protective cover and an o-ring should
always be installed on the fixed calibration pin as well as a protective plug, included
a sealing, in the bushing. Replace damaged parts with new.
Spare part
Protective plug for bushing
Product manual - IRB 1100
3HAC064992-001 Revision: L
6.4.3 Installation locations for the calibration tools
Article number
3HAC059556-001
© Copyright 2019-2022 ABB. All rights reserved.
6 Calibration
Note
Replace if damaged or missing.
Continues on next page
Continued
727