ABB IRB 1100 Product Manual page 575

Spare part
Lower cable harness (CP/CS and
air hose, with Ethernet)
Lower cable harness, Clean Room
(CP/CS and air hose, with Ethernet)
Gear unit with pulley, axis 1
Base
Base with sealing ring
Base with sealing ring, Clean
Room
Axis-1 radial sealing
Motor with flange, axis 1
Timing belt, axis 1
Motor with flange, axis 2
Timing belt, axis 2
Mechanical stop, axis 1
Base bottom cover
Base rear cover
Base rear cover, Clean Room
Base adapter
Base adapter, Clean Room
Swing cover
Swing cover, Clean Room
Swing support cover
Swing support cover, Clean Room
Gasket for base bottom
Gasket for base rear
Product manual - IRB 1100
3HAC064992-001 Revision: L
Article number
3HAC075523-001
3HAC075581-001
3HAC069062-001
3HAC069048-001
3HAC074270-001
3HAC075488-001
3HAC070148-005
3HAC083589-001
3HAC061934-001
3HAC083588-001
3HAC061935-001
3HAC061947-001
3HAC060463-001
3HAC070312-001
3HAC075513-001
3HAC070313-001
3HAC075793-001
3HAC069051-001
3HAC075498-001
3HAC069052-001
3HAC075500-001
3HAC065345-001
3HAC065350-001
© Copyright 2019-2022 ABB. All rights reserved.
5.8.1 Replacing the axis-1 gearbox
Note
Used with protection classes IP40
and IP67.
Used with protection type Clean
Room.
Used with protection class IP67.
Used with protection type Clean
Room.
Used with protection class IP67
and protection type Clean Room.
Replace if damaged.
.
Replace if damaged.
Standard configuration, used for
robots with rear connector inter-
face.
Used for robots with bottom con-
nector interface.
Used for robots with bottom con-
nector interface.
Used with protection type Clean
Room.
Used for robots with bottom con-
nector interface.
Used for robots with bottom con-
nector interface.
Used with protection type Clean
Room.
Used with protection type Clean
Room.
Used with protection type Clean
Room.
Used with protection class IP67
and protection type Clean Room.
Replace if damaged.
Used with protection class IP67
and protection type Clean Room.
Replace if damaged.
Continues on next page
5 Repair
Continued
575