Builder, Station Setup, for Builder 200 or higher
9.3.2
Description
Diagram
Establish Coordinates - Over Known Point
The Setup method Establish Coordinates - Over Known Point is used to set up
the instrument on a known point and orient to a known azimuth or to up to five
known backsight points. If more than one backsight point was used, the quality of
the orientation is shown in the result screen.
P3
P0
P2
P0
P1
P2
P1
P3
α
Known Station
Known backsight point
Known backsight point
Known backsight point
Azimuth
100