Table of Contents
Advertisement
Standard Set-up Procedures
4.7
Over the Top
The Over-the-Top Mount Assembly consists of a Scope and a mounting
bracket for attaching the Piper to a tripod.
•
Remove the four feet from the Piper,
b
then attach the mounting plate (a) by re-
installing the feet.
•
Attach the Scope and mount (b) to the
top of the Piper using the two screws and
allen driver supplied with the scope.
•
Attach the Piper to the tripod and tighten
securely.
•
Set the crosshairs of the scope on a
a
target and then adjust the beam to the
target using the LEFT and RIGHT arrow
buttons on the Piper or Remote.
52
Advertisement
Table of Contents
