Honda Accord 2008 Manual page 402

07/11/02 09:03:19 61TA0000_110_0083
12. Turn the ignition switch to LOCK (0).
13. Jump the SCS line with the HDS.
14. Disconnect ECM/PCM connector B (49P).
15. Check for continuity between MAF sensor/IAT
sensor 5P connector terminal No. 4 and ECM/PCM
connector terminal B34.
＊０３
Is there continuity?
YES
NO −
PCM (B34) and the IAT sensor, then go to step 22.
MAF SENSOR/IAT SENSOR 5P CONNECTOR
SG2 (GRN/BLK)
Wire side of female terminals
ECM/PCM CONNECTOR B (49P)
SG2 (GRN/BLK)
Terminal side of female terminals
− Go to step 27.
Repair open in the wire between the ECM/
16. Turn the ignition switch to LOCK (0).
17. Jump the SCS line with the HDS.
18. Disconnect ECM/PCM connector B (49P).
19. Check for continuity between MAF sensor/IAT
sensor 5P connector terminal No. 5 and ECM/PCM
connector terminal B32.
MAF SENSOR/IAT SENSOR 5P CONNECTOR
Wire side of female terminals
ECM/PCM CONNECTOR B (49P)
IAT (RED/YEL)
Terminal side of female terminals
Is there continuity?
YES − Go to step 27.
NO − Repair open in the wire between the ECM/
PCM (B32) and the IAT sensor, then go to step 22.
IAT (RED/YEL)
(cont'd)
11-83
＊０４