Honda Accord 2008 Manual page 406

07/11/02 09:03:20 61TA0000_110_0087
17. Check for Temporary DTCs or DTCs with the HDS.
Is DT C P0117 indicated?
YES − Check for poor connections or loose
terminals at ECT sensor 1 and the ECM/PCM, then
go to step 1.
−
NO Troubleshooting is complete. If any other
Temporary DTCs or DTCs are indicated, go to the
indicated DTC's troubleshooting.
18. Reconnect all connectors.
19. Update the ECM/PCM if it does not have the latest
software (see page 11-231), or substitute a known-
good ECM/PCM (see page 11-7).
20. Check for Temporary DTCs or DTCs with the HDS.
Is DT C P0117 indicated?
YES − Check for poor connections or loose
terminals at ECT sensor 1 and the ECM/PCM. If the
ECM/PCM was updated, substitute a known-good
ECM/PCM (see page 11-7), then recheck. If the
ECM/PCM was substituted, go to step 1.
NO − If the ECM/PCM was updated, troubleshooting
is complete. If the ECM/PCM was substituted,
replace the original ECM/PCM (see page 11-232). If
any other Temporary DTCs or DTCs are indicated,
go to the indicated DTC's troubleshooting.
11-87