Hcss Bm Paper Entry Rap - Xerox WorkCentre 5687 Series Service Manual

11-100-170 HCSS BM Paper Entry RAP

11-100-170 The leading edge of the sheet is late to the HCSS BM.
Initial Actions
Check that the HCSS BM is securely docked to the machine.
Procedure
Enter dC330, code 11-100, actuate the entry sensor, Q11-100, Figure 1. The
changes.
Y N
Go to Flag 1. Check the sensor Q11-100.
Refer to:
• GP 11, How to Check a Sensor.
• P/J420, HCSS PWB.
• 11C-170 HCSS BM Power Distribution RAP.
Install new components as necessary:
• Entry sensor Q11-100, PL 11.70 Item 9.
• HCSS PWB, PL 11.92 Item 5.
Enter dC330, code 11-000 to run transport motor 1A, MOT 11-000, Figure 1. Transport motor
1A runs.
Y N
Go to Flag 3 and the motor 1A, MOT 11-000.
Refer to:
• GP 10, How to Check a Motor.
• P/J419, HCSS PWB.
• 11C-170 HCSS BM Power Distribution RAP.
Install new components as necessary:
• Transport motor 1A, PL 11.70 Item 5.
• HCSS PWB, PL 11.92 Item 5.
Enter dC330, code 11-000 to run transport motor 1B, MOT 11-001, Figure 1. Transport motor
1B runs.
Y N
Go to Flag 4 and check transport motor 1B.
Refer to:
• GP 10, How to Check a Motor.
• P/J425, HCSS PWB.
• 11C-170 HCSS BM Power Distribution RAP.
Install new components as necessary:
• Transport motor 1B, PL 11.70 Item 5.
• HCSS PWB, PL 11.92 Item 5.
Enter dC330, code 11-002 to energize the diverter solenoid, SOL 11-002, Figure 1. The
diverter solenoid energizes.
Status Indicator RAPs
11-100-170
Y N
Go to Flag 2 and check the solenoid, SOL11-002.
Refer to:
• GP 12, How to Check a Solenoid or Clutch.
• P/J421, HCSS PWB.
• 11C-170 HCSS BM Power Distribution RAP.
Install new components as necessary:
• Diverter solenoid SOL11-002, PL 11.66 Item 3.
display
• HCSS PWB, PL 11.92 Item 5.
Perform SCP 6 Final Actions.
August 2007
2-474 WorkCentre 5687 Family