Subaru IMPREZA GD 2007 Series Manual page 3838

asieps_tobira_IM_US.book 9 ページ ２０１２年１月１７日 火曜日 午後３時４８分
3. Power Window Control
Switch
A: REMOVAL
1. MAIN SWITCH
1) Disconnect the ground cable from the battery.
2) Remove the screw cover by using a flat tip
screwdriver.
3) Loosen the screw to remove power window main
switch.
4) Disconnect the connector.
2. SUB-SWITCH
1) Disconnect the ground cable from the battery.
2) Remove the screw securing the switch panel.
Power Window Control Switch
3) Remove the switch panel.
4) Disconnect the connector.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1. MAIN SWITCH
GW-00400
1) Remove the main switch. <Ref. to GW-9, RE-
MOVAL, Power Window Control Switch.>
2) UNLOCK the window lock switch.
3) Connect the battery and main switch as shown
in the figure.
GW-00401
GW-00302
GW-9
GLASS/WINDOWS/MIRRORS
7 6 5 4 3 2 1
16 15 14 13 12 11 10 9 8
GW-00303
-
12V
GW-00523