Toyota Celica 2005 Repair Manual page 1162

DTC B0132/61
CIRCUIT DESCRIPTION
The P/T squib RH circuit consists of the airbag sensor assembly and the seat belt pretensioner RH.
It causes the SRS to deploy when the SRS deployment conditions are satisfied.
For details of the function of each component, see OPERATION on page RS−2.
DTC B0132/61 is recorded when a ground short is detected in the P/T squib RH circuit.
DTC No.
S Short in P/T squib RH wire harness (to ground)
B0132/61 S P/T squib RH malfunction
S Airbag sensor assembly malfunction
WIRING DIAGRAM
See page DI−954.
INSPECTION PROCEDURE
1 Prepare for inspection (See step 1 on page DI−1025).
2 Check floor wire.
Floor Wire
P/T Squib RH
(−)
H01019
H08392
OK
2005 CELICA (RM1131U)
DIAGNOSTICS
DTC Detecting Condition
Airbag
Sensor
Assembly
PR+
(+)
H08393
− SUPPLEMENTAL RESTRAINT SYSTEM
Short in P/T Squib RH Circuit
(to Ground)
S Seat belt pretensioner RH (P/T squib RH)
S Airbag sensor assembly
S Floor wire
CHECK:
Measure the resistance between the body ground and PR+ of
the floor wire connector on the seat belt pretensioner RH (P/T
squib RH) side.
OK:
Resistance: 1 MΩ or Higher
NG Repair or replace floor wire.
1161
Trouble Area
DI−961
DI6PL−23