Chapter 10
10.5 Parts Replacement Procedure
10.5.1 Left Deck Drive Assembly
10.5.1.1 Removing the Rear Cover (lower)
1) Remove the 6 screws [1], and detach the rear cover (lower) [2].
[1]
[2]
10.5.1.2 Removing the High-Voltage Power Supply PCB
1) Remove the 2 screws [1], and detach the 2 grounding wires [2].
2) Disconnect the 9 connectors [3].
3) Remove the 4 screws [4], and detach the high-voltage power supply
PCB [5].
[4]
[5]
[1]
[4]
[2]
10.5.1.3 Left Deck Drive Assembly
1) Remove the 4 screws [1], and disconnect the connector [2]; then,
detach the left deck drive assembly [3].
10-12
0009-3891
[1]
[1]
[1]
[1]
F-10-7
0009-3835
[3]
[2]
[1]
[4]
[3]
[4]
F-10-8
0009-3838
[2]
[1] [3]
[1]
10.5.2 Manual Feed Pickup Drive Assembly
10.5.2.1 Removing the Rear Cover (upper)
1) Open the cable clamp [1], and free the reader unit communications
cable [2].
[1]
2) Remove the 6 screws [1], and detach the upper rear cover [2].
[2]
[1]
F-10-9
0009-3952
[2]
F-10-10
[1]
[1]
F-10-11