Function Overview
This section introduces major functions of the M9602A/M9603A. For more
information, refer to the User's Guide, the IVI driver references, and Soft Front
Panel User's Guide.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Limit (Compliance)
Limit or compliance is the output limiter for preventing damage to a device under
test (DUT) due to overcurrent or overvoltage. The voltage Limit is for current
source, and the current Limit is for voltage source.
Operation Mode
The M9602A/M9603A module provides two operation modes for source output.
The following modes can be selected depending on DUT or application.
Keysight M9602A/M9603A Startup Guide, Edition 3
"Limit (Compliance)"
"Operation Mode"
"Output Filter"
"Pulse Output"
"Sweep Output"
"List Sweep"
"Ranging Mode"
"Seamless Current Measurement Ranging"
"Trigger System"
"Measurement Time"
"Remote Transient Voltage Measurement"
"Automatic Output On/Off"
"Output Off Mode"
"Interlock"
"Protection from Emergency"
Function Overview
37