Table of Contents
Advertisement
1
Remote Operation
Return value
Se also property
Return value
Properties
36
Sub Abort ()
Aborts a currently running measurement or initialization.
Parameters
No parameters.
No return value.
Sub WaitForOPC ()
Waits until the last asynchronously called command has finished
execution. Exceptions thrown during execution of an asynchronously
called command could be caught when calling WaitForOPC() or
OperationComplete().
OperationComplete()
Parameters
No parameters.
No return value.
Reading these properties requires only a passive session, while setting
these properties requires an active session.
LaserWvl_nm As RemoteClient.ELaserWvl
Get or set the current wavelength of the LCA optical output in nanometers.
Parameters
No parameters.
LaserPower_dBm As Double
Get or set the current power of the LCA optical output in dBm
Parameters
No parameters.
LaserState As RemoteClient.ELaserState
Get or set the current state of the LCA optical output
Parameters
No parameters.
Keysight N437x Series Lightwave Component Analyzer, Programmer's Guide
Advertisement
Table of Contents
