Step 5: Verify Operation of the M9703A Module
Step 5: Verify Operation of the M9703A Module
The intention of this step is to verify correct operation of the newly installed module.
Run Keysight Connection Expert by right-clicking the task bar icon
Keysight Connection Expert.
It will display the modules that are installed. Review the configuration data and then
launch the SFP. This will provide control of the module for self test and other
operational verification procedures.
Keysight M9703A Instrument Properties
The instrument properties may be viewed by clicking on the desired instrument from
the list on the left.
If the module does not appear in the Keysight Connection Expert, first try the
'Refresh All' button. If that does not work, restart your PC or embedded controller
and start Keysight Connection Expert again.
Keysight M9703A Installed Software
The SFP 5 application may be launched from the list installed software, by clicking the
Start Soft Front Panel button.
18
, and select
Keysight M9703A Startup Guide