Memory Sanitization and Removal Procedures
Archiving and Restoring Factory Calibration Data Files
Data Backup or Restore using Alignment Data Wizard
The Alignment Data Wizard is launched directly from the instrument
application software interface, so you do not need to exit the application
software before proceeding.
Follow the steps below to start the wizard:
1. Plug the mouse's USB cable into one of the instrument's USB ports.
2. Plug the USB Memory Device into another of the instrument's USB ports. For details of
3. Plug the USB keyboard into another of the instrument's USB ports.
4. Press System > Alignments > Backup or Restore Align Data...
5. If you are prompted to enter the Administrator password, enter either Keysight4u!,
6. When prompted, press OK to close the analyzer program.
7. The
Security Features & Document of Volatility
appropriate devices, see
"Selection of USB Memory Device" on page
or agilent4u, depending on your instrument's software version.
Alignment Data Wizard
instrument's processor type.
If the instrument does not have a PC6S or PC7S Processor Assembly, then the dialog
is as shown in
Figure 5-6
dialog appears. Its content depends on the
below:
42.
47