Adc Alignment Failure - Keysight X-Series Manual

Instrument Messages
Condition Messages
An event with the number shown in the table means the condition has been
detected. When the condition is cleared, an event with the number plus 1000
is generated. These error numbers can be viewed in the Show Errors screen,
along with the DETECTED and CLEARED indicators.
For example, message 42 indicates that the "RF Alignment Failure" condition
has been detected, and message 1042 indicates that failure has been cleared.
Several bits in this register are "summary bits" for registers at a lower level.
There are no messages associated with these bits; they exist only as status bits,
which can be read with a
a
STATus:QUEStionable:CALibration:CONDition?
Note that these summary bits summarize the state and history of the event
registers at the lower level. This is true even for bits in the
STATus:QUEStionable:CALibration
— The summary bits read by the
— The summary bits read by the
Thus, the summary bits cannot be used to determine the current state of a
lower level condition bit; only the state and history of the lower level event bits.
This register is itself summarized as bit 8 of the
as described in the section
Err# Bit in status Message
register
36 0 unused
38 1 unused
40 2
TG Alignment Failure
42 3
RF Alignment Failure
44 4
IF Alignment Failure
46 5
LO Alignment Failure
48 6

ADC Alignment Failure

50 7
FM Demod Alignment Failure
52 8
Extended Align Needed
Summary
Instrument Messages
STATus:QUEStionable:CALibration:CONDition?
event bits are set in any of the :CALibration sub-registers :SKIPped,
:EXTended:NEEDed or :EXTended:FAILure.
query are true if any event bit has undergone a false-to-true transition with
the PTRansition filter set, or a true-to-false transition with the NTRansition
filter set, in any of the :CALibration sub-registers :SKIPped,
:EXTended:NEEDed or :EXTended:FAILure.
STATus:QUEStionable:CALibration?
condition register. This means that:
STATus:QUEStionable:CALibration?
STATus:QUEStionable
"601 to 699, Error Summaries" on page
Error or More Information
Warning
E
E
E
E
E
E
status bit This bit is the summary bit for the
only STATus:QUEStionable:CALibration:EXT
ended:NEEDed sub-register.
event query or
query.
query are true if any
event
register,
109.
89